TransMac swipe card reader module slot readers RF - RF reader - Encoder dealer Card Collector

card dispenser

 

KYT-2100 Series


Type of Magazine

stacker type

 Card Dispenser KYT-2100

Card quantity

48, 100, 200, 300, 500 cards (based on 0,76mm cards)

Card thickness

0,2 mm – 1,0 mm / 0,008“ - 0,039“

Card issuing time

 1,8 – 2,2 sec.

Card transport

roller

Voltage

 DC 24V(±5%) (DC12V (±5%) optional)

Interface

 TTL, RS232, RS422

Options

shutter, bezel / mouthpiece, Low Card Sensor at 25,50,75 cards, 12Volt version


TOP

 

DOC - 1000 Series
Card Dispenser Compact Version 85 x 80 x 105 mm

Type of Magazine stacker type DOC - 1000 Serie Kartengeber Kompaktgerät 85 x8 80 x 105 mm
Card quantity
50, 80 cards
Card thickness 0,2mm – 0,8 mm / 0,008“ - 0,031“
Card issuing time 1,5 sec.
Card transport roller
Voltage DC24V±10%
Interface TTL



TOP

 

KHT- 2100 Series
Card Dispenser for embossed cards and plastic cards - card capture

Function stacker type KHT - 2100 Serie Kartengeber für Plastikkarten und geprägte Karten
Card quantity 100, 200, 300, 500 cards
Card thickness
0,0,76 mm, 0,84 mm, 1,0 mm / 0,030“, 0,033“, 0,039“ mm , 0,84 mm, 1,0 mm
Card transport type
Voltage DC 24V(±5%)
Interface TTL, RS232, RS422
Options shutter, bezel / mouthpiece, Power Jack Version


TOP

 

KYT- 2500 Series
Card Dispenser

Type of Magazine cartridge type KYT-2500 Serie Kartengeber
Card quantity
100, 200, 300, 500 cards
Card thickness
0,2 mm – 1,0 mm / 0,008“ - 0,039“
Card issuing time 1,5 – 1,8 sec.
Card transport roller
Voltage DC 24V(±5%)
Interface
TTL, RS232, RS422
Options shutter, bezel / mouthpiece


TOP





KYT- 2300 Series
Card Dispenser for wrapped plastic sheet cards / envelopes

Type of Magazine stacker type KYT-2300 Serie Kartengeber für verpackte Karten
Card quantity 150 cards
Card thickness 0,2 mm – 1,0 mm / 0,008“ - 0,039“
Card issuing time 1,5 sec.
Card transport roller, card drop version
Voltage
 DC 24V(±5%)
Interface TTL, RS232, RS422


TOP



KYT- 2700 Series
Card Dispenser for wrapped plastic sheet cards / envelopes and oversized cards

Type of Magazine stacker type KYT-2700 Serie Kartengeber für verpackte Karten und Sondergrößen
Card quantity 150 cards
Card thickness 0,2 mm – 1,0 mm / 0,008“ - 0,039“
Size of card hight: ISO Standard width: bis 120 mm (4,72“)
Card issuing time 1,5 sec.
Card transport roller
Voltage DC 24V(±5%)
Interface TTL, RS232, RS422
Special version KYT-2912 8 dispenser controlled by one single board


TOP



DOC – 800 Series
Card Dispenser

Type of Magazine stacker type DOC-800 Serie Kartengeber
Card quantity 100
stacker type 0,2mm – 0,8 mm / 0,008“ - 0,031“
Card issuing time <1,5 sec.
Card transport roller
Voltage DC 24V(±10%)
Interface TTL
Options Mechanical shutter


TOP



CDC – 1000 Series
Card Dispenser + Card Collector

Type of Magazine stacker type CDC - 1000 Serie Kartengeber + Kartensammler
Card quantity 50
Card thickness
0,76
Card transport roller
Voltage DC 24V(±5%)
Interface RS232
Options RF ard reader + encoder Mifare 1K.
Specifics Error card capture function and card collection (return into stacker)
TOP




KYT- 2200 Series
Card Dispenser with capture function

Type of Magazine stacker type KYT-2200 Serie Kartengeber mit Karteneinzugsfunktion
Card quantity 48, 100, 200, 300, 500
Card thickness Card issuing time
Card issuing time 1,7 sec.
Ausgabemethode Rollen
Voltage DC 24V(±5%)
Interface TTL, RS232, RS422
Options shutter, bezel / mouthpiece, higher base with card bin
Specifics Error card capture function
4 inset nuts for attaching external modules e.g. RF, Barcode etc.

TOP

 

 

KHT - 2200 Series
Card Dispenser for embossed cards and plastic cards - card capture

Type of Magazine cartridge type KHT -2200 Serie Kartengeber mit Karteneinzugsfunktion für Plastikkarten und geprägte Karten
Card quantity 100, 200, 300, 500
Card thickness
0,76 mm, 0,84 mm, 1,0 mm / 0,030“, 0,033“, 0,039“
Card issuing time 1,2 sec.
Card transport push type / finger type
Voltage DC 24V(±5%)
Interface RS232 , RS422
Options bezel / mouthpiece, mechanical or Solenoid shutter, power jack.
Specifics Error card capture function

TOP




KYT- 2200C Series
Card Dispenser with card capture function

Type of Magazine cartridge type KYT-2200C Serie Kartengeber mit Karteneinzugsfunktion
Card quantity 48, 100, 200, 300, 500
Card thickness 0,2 mm – 1,0 mm / 0,008“ - 0,039“
Card issuing time 1,7 sec.
Card transport roller
Voltage DC 24V(±5%)
Interface TTL, RS232, RS422
Options shutter, bezel / mouthpiece
Specifics Card capture function
4 inset nuts for attaching external modules e.g. RF, Barcode etc.

TOP

 

 

KHT- 22F00
Card Dispenser for embossed cards and plastic cards - card capture

Type of Magazine stacker type KHT - 22F00
Card quantity 48, 100, 200, 300, 500
Card thickness
0,76 mm bis 1,00 mm
Card issuing time 1,2 sec.
Card transport push type / finger type
Voltage DC 24V(±5%)
Interface RS232, RS422
Options bezel / mouthpiece, shutter

Specifics Error card capture function.
4 inset nuts for attaching external modules e.g. RF, Barcode etc.


TOP

 

 

CIM- 8000 Series
Card Dispenser and Card Collector – with card capture function

Type of Magazine cartridge type
Card quantity 500, 1000, 1500 cards
Card thickness 0,2 mm – 1,0 mm / 0,008“ - 0,039“
Card issuing time < 1,2 sec.
Card transport roller
Voltage AC 110 ~ AC 220V Free voltage
Interface RS232
Options Sutter, bezel / mouthpiece, error card bin
Specifics „low height“ construction. Cards are being issued from top, stored below.
Card capture function



TOP

 

KYT- 2000 Series
Card Dispenser 2 stackers and 1 Card Exit

Type of Magazine stacker type KYT - 2000
Card quantity 2 x 200, 2 x 300, 2 x 500 cards
Card thickness 0,2 mm – 1,0 mm / 0,008“ - 0,039“
Card issuing time 1,5 sec.
Card transport roller
Voltage DC 24V(±5%)
Interface TTL, RS232
Specifics Error card capture function and error card bin.




TOP

 



KYT- 2600 Series
Card Dispenser 2 cartridges and 1 Card Exit

Type of Magazine cartridge type KYT-2600 Serie
Card quantity 2 x 200, 2 x 300, 2 x 400, 2 x 500 cards
Card thickness 0,2 mm – 1,0 mm / 0,008“ - 0,039“
Card issuing time 1,6 sec.
Card transport roller
Voltage DC 24V(±5%)
Interface RS232
Options Side doors for easy change of cartridges.
Specifics Error card capture function and error card bin.

TOP

 

 

TCM-200

Card Dispenser 2 stackers and 2 Card Exits

Type of Magazine stacker type TCM - 200 Serie Kartengeber mit 2 Magazinen und 2 Kartenausgängen
Card quantity 370 cards (0,76mm)
Card thickness
0,2 mm – 1,0 mm / 0,008“ - 0,039“
Card transport roller
Voltage
Interface RS232
Options Different controller boards and power supplies.



TOP

 

 

KYT- 4600C Series
Card Dispenser 4 Cardridges and 1 Card Exit

Type of Magazine cartridge type KYT-4600C Serie Kartengeber mit 4 Wechselmagazinen + 1 Kartenausgang
Card quantity 4 x 100, 4 x 200, 4 x 300, 4 x 500 cards
Card thickness 0,2 mm – 1,0 mm / 0,008“ - 0,039“
Card issuing time 1,5 – 2,0 Sec
Card transport roller
Voltage DC 24V(±5%)
Interface RS232
Specifics Error card capture function
Each oft he 4 cartridges can be addressed individually.

TOP

 



KYT- 4600S Series
Card Dispenser 4 stackers and 1 Card

Type of Magazine stacker type KYT-4600S Serie Kartengeber mit 4 Wechselmagazinen + 1 Kartenausgang
Card quantity 4 x 100, 4 x 200, 4 x 300, 4 x 500 cards
Card thickness 0,2 mm – 1,0 mm / 0,008“ - 0,039“
Card issuing time 1,5 – 2,0 Sec
Card transport roller
Voltage DC 24V(±5%)
Interface RS232
Specifics Error card capture function
Each oft he 4 cartridges can be addressed individually.

TOP




TCM-400 Series
Card Dispenser 4 stackers and 4 Card Exits
Type of Magazine stacker type TCM - 400 Serie
Card quantity 4 x 370 cards (0,76mm)
Card thickness 0,2 – 1,0mm
Card transport 1,5 – 2,0 Sek
Card transport roller
Voltage
Interface RS232
Options Different controller boards and power supplies.

TOP



TCM-V400 Series
Card Dispenser 4 stackers and 4 Card Exits

Type of Magazine

stacker Type

 TCM - V400 Serie Kartengeber mit 4 Magazinen und 4 Kartenausgängen
Card quantity 4 x 165 cards (0,76mm)
Card thickness Card transport
Card transport roller
Interface RS232
Options Different controller boards and power supplies.

TOP

 

 

TCM-600 Series
Card Dispenser 6 stackers and 6 Card Exits

Type of Magazine stacker Type TCM-400 Serie Kartengeber mit 4 Magazinen und 4 Kartenausgängen
Card quantity 6 x 370 cards (0,76mm)
Card thickness

0,2 mm – 1,0 mm / 0,008“ - 0,039“
Card transport roller
Interface RS232
Voltage
Options Different controller boards and power supplies.

TOP



TCM-V800 Series
Card Dispenser 8 stackers and 8 Card Exits

Type of Magazine Tacker Type TCM V800 Serie Kartengeber mit 8 Magazinen + 8 Kartenausgängen
Card quantity 8 x 165 cards (0,76mm)
Card thickness
0,2 – 1,0mm
Card issuing time
Card transport roller
Voltage
Interface RS232
Options Different controller boards and power supplies.



TOP



TIM-1PT
Dispenser for Sports and Collector Cards etc.

Type of Magazine stacker type TIM - 1 PT Ausgeber für Sport- und Sammelbilder / Karten
Card quantity 420 cards bei 0,25mm Card thickness
Card thickness Max: 95 x 54 mm
Stärke: von 0,25 – 1,52 mm
Card issuing time
Card transport roller
Voltage DC 24V(±5%)
Interface RS232
Options Different controller boards and power supplies.



TOP

 

 

TIM-1Barcode
Card Dispenser with Bar Code Reader

Type of Magazine type TIM-1 Barcode
Card quantity 375 cards (0,76mm)
Card thickness
0,25 – 2,0mm
Card issuing time
Card transport roller
Voltage DC 24V(±5%)
Interface RS232
Options
 Different controller boards and power supplies.



TOP

 

 

TCD - 1J Serie
CD + DVD Dispenser

Type of Magazine stacker type TCD - 1J Serie CD + DVD Dispenser
Type of CD/DVD
 Jewel Case, Slim Case, Papierhülle
Voltage 12 Volt, 110 Volt, 230 Volt
Interface RS232
Options Different controller boards and power supples.



TOP

 

 

TCD - MINI
Mini - CD + DVD Dispenser

Type of Magazine stacker type TCD - MINI Mini - CD + DVD Dispenser
Type of CD/DVD
 Jewel Case, Slim Case, Papierhülle
Voltage 12 Volt, 110 Volt, 230 Volt
Interface RS232
Options Different controller boards and power supples.




TOP

 

TXXX



Dispenser for Non-Standard-Cards, Booklets, Casettes, Voucher and other formats.
your inquiry for customized products is welcome.


TOP

 

card issuing machines

 

CIM-1000 Series
Card Issuing Systems

Type of Magazine stacker type Card Issuing Machines CIM-1000
Reader + Encoder magnetic cards 3 tracks read+write, HiCo + LoCo
Card quantity
100, 200, 300, 500 cards
Card thickness 0,2 mm – 1,0 mm / 0,008“ - 0,039“
Card issuing time 2,3 – 5,0 seconds, (depending on configuration)
Transport roller
Voltage DC 24V
Interface RS232
Options shutter, bezel / mouthpiece, Thermal RW Printer
Specifics card capture function


TOP

 

 

CIM-1800
Card Issuing Systems

Type of Magazine stacker type CIM-1800 Kartenausgabe System
Reader + Encoder RF-cards ISO14443 Mifare R+W
Card quantity
100, 200, 300, 500 cards
Card thickness 0,2 mm – 1,0 mm / 0,008“ - 0,039“
Card issuing time 2, seconds
Card transport roller
Voltage DC 24V
Interface RS232
Options shutter, bezel / mouthpiece, Thermal RW Printer


TOP

 

 

CHM-1000 Series
Card Issuing Systems

Type of Magazine stacker type




CHM-1000 Serie Kartenausgabe System
Reader + Encoder magnetic cards 3 tracks read+write, HiCo + LoCo
Chip Cards T=0 T=1 R+W
RF-cards ISO14443 Mifare R+W
Card quantity 100, 200, 300, 500 cards
Card thickness 0,2 mm – 1,0 mm / 0,008“ - 0,039“
Card issuing time 2,3 – 5,0 seconds, (depending on configuration)
Card transport push type / finger type
Voltage DC 24V
Interface RS232
Options shutter, bezel / mouthpiece, Thermal RW Printer
Specifics card capture function


TOP

 

 

CHM-1800
Card Issuing Systems

Type of Magazine stacker type






CHM-1800 Serie Kartenausgabe System
Reader + Encoder RF-cards ISO14443 Mifare R+W
Card quantity
100, 200, 300, 500 cards
Card thickness 0,2 mm – 1,0 mm / 0,008“ - 0,039“
Card issuing time 2,0 seconds
Card transport push type / finger type
Voltage DC 24V
Interface RS232
Options shutter, bezel / mouthpiece, Thermal RW Printer
Specifics card capture function


TOP

 

 

CHR-1000 Series
Card Issuing Systems

Type of Magazine stacker type CHR-1000 Serie Kartenausgabe System
Reader + Encoder Magnetic Cards 3 tracks nur lesen
Chip Cards T=0 T=1, Speichercards R+W
RF-cards ISO14443 Mifare R+W
Card quantity 100, 200, 300, 500 cards
Card thickness 0,2 mm – 1,0 mm / 0,008“ - 0,039“
Card issuing time 2,3 – 5,0 seconds, (depending on configuration)
Card transport push type / finger type
Voltage DC 24V
Interface RS232
Options shutter, bezel / mouthpiece
Specifics card capture function


TOP

 

 

CIP-1000 Series
Card Issuing System with Thermal RW Printer (TRW Technology)

Type of Magazine stacker type CIP-1000 Serie Kartengeber + Kodierer mit Thermal RW Drucker
Reader + Encoder magnetic cards 3 tracks read+write, HiCo + LoCo
Chip Cards T=0 T=1 R+W
RF-cards ISO14443 Mifare R+W
Printer
Thermal RW Printer
Card quantity
100, 200, 300, 500 cards
Card thickness 0,2 - 0,84 mm TRW cards
Card issuing time Depending on configuration
Card transport roller
Voltage DC 24V
Interface RS232, USB
Options shutter, bezel / mouthpiece, Thermal RW Printer
Specifics card capture function


TOP

 


CIP-1800 Series
Card Issuing System with Thermal RW Printer (TRW Technology)

Type of Magazine stacker type CIP-1800 Serie Kartengeber + RF- Kodierer mit Thermal RW Drucker
Reader + Encoder RF-cards ISO14443 Mifare R+W
Printer
Thermal RW Printer
Card quantity
100, 200, 300, 500 cards
Card thickness 0,2 - 0,84 mm TRW cards
Card issuing time Depending on configuration
Card transport roller
Spannung DC 24V
Interface RS232, USB
Options shutter, bezel / mouthpiece, Thermal RW Printer
Specifics card capture function


TOP

 

 

CHP-1000
Card Issuing System with Thermal RW Printer (TRW Technology)

Type of Magazine stacker type
CHP-1000 Kartengeber + Kodierer mit Thermal RW Drucker
Reader + Encoder magnetic cards 3 tracks read+write, HiCo + LoCo
Chip Cards T=0 T=1 R+W
RF-cards ISO14443 Mifare R+W
Printer
Thermal RW Printer
Card quantity 100, 200, 300, 500 cards
thickness 0,76 mm 0,84mm TRW cards
Card issuing time Depending on configuration
Card transport push type / finger type
Spannung DC 24V
Interface RS232, USB
Options shutter, bezel / mouthpiece, Thermal RW Printer
Specifics card capture function


TOP


 

 

CHP-1800
Card Issuing System with Thermal RW Printer (TRW Technology)

Type of Magazine stacker type CHP-1800 Kartengeber + RF- Kodierer mit Thermal RW Drucker
Reader + Encoder RF-cards ISO14443 Mifare R+W
Printer
Thermal RW Printer
Card quantity
100, 200, 300, 500 cards
Card thickness 0,76 mm 0,84mm TRW cards
Card issuing time Depending on configuration
Card transport push type / finger type
Voltage DC 24V
Interface RS232, USB
Options shutter, bezel / mouthpiece,
Specifics card capture function




TOP

 

 

CIM-2000 Series
Card Issuing Systems

Type of Magazine cartridge type CIM-2000 Serie Kartenausgabe System
Reader + Encoder Magnetic Cards 2 tracks R+W, HiCo + LoCo
Chip cards T=0 T=1 R+W
RF-cards ISO14443 Mifare
Card quantity
200, 300, 500 cards
Card thickness 0,2 mm – 1,0 mm / 0,008“ - 0,039“
Card issuing time 2,3 – 5,0 seconds, (depending on configuration)
Card transport roller
Voltage DC 24V
Interface RS232
Options shutter, bezel / mouthpiece, Thermal RW Printer, Cabinet
Specifics card capture function



TOP

 

 

CIM-2800 Series
Card Issuing Systems

Type of Magazine cartridge type


CIM-2800 Serie Kartenausgabe System
Reader + Encoder RF-cards ISO14443 Mifare
Card quantity 200, 300, 500 cards
Card thickness 0,2 mm – 1,0 mm / 0,008“ - 0,039“
Card issuing time 2,3 – 5,0 seconds, (depending on configuration)
Card transport roller
Voltage DC 24V
Interface RS232
Options shutter, bezel / mouthpiece, Thermal RW Printer, Cabinet
Specifics capture


TOP

 

 

CIM-1000C, CIM-2000C CHP-1000C
Card Issuing Systems Cabinet Version


Type of Magazine


 For data, please see specification of the modules CIM-1000, CIM-2000, CHM-1000


CIM-1000C, CIM-2000C CHP-1000C Kartenausgabe System im Gehäuse
TOP

 

 

KYT-5000 Series
Card Issuing Systems

Type of Magazine stacker type KYT-5000 Serie Kartenausgabe System
Reader + Encoder Magnetic Cards 3 tracks R+W, HiCo + LoCo
Chip Cards T=0 T=1 R+W
RF-cards ISO14443 Mifare
Card quantity 2 x 300 cards, 2 x 500 cards
Card thickness 0,2 mm – 1,0 mm / 0,008“ - 0,039“
Card issuing time < 1,2 sec.
Card transport roller
Voltage AC 110 ~ AC 220V Free voltage
Interface RS232
Options shutter, HiCo/LoCo Kodierung, bezel / mouthpiece, Thermal RW Printer
Specifics card capture function



TOP

 

 

KYP-5000 Series
Card Issuing System with Printer (TRW)

Type of Magazine stacker
KYT-5000 Serie Kartenausgabe System
Reader + Encoder Magnetic Cards 3 tracks R+W, HiCo + LoCo
Chip Cards T=0 T=1 R+W
RF-cards ISO14443 Mifare
Printer
Thermal RW Printer
Card quantity 2 x 300 cards, 2 x 500 cards
Card thickness 0,2 mm – 1,0 mm / 0,008“ - 0,039“
Card issuing time Depending on configuration and number of printed lines.
Card transport roller
Voltage AC 110 ~ AC 220V Free voltage
Interface RS232
Options shutter, HiCo/LoCo Kodierung, bezel / mouthpiece
Specifics card capture function



TOP

 

 

CIM-5000 Series
Card Dispenser with security cartridges

Type of Magazine cartridge type. Non-destructive Security cartridges with own memory of time and number of cards loaded and issued. Card loading and card dispensing only by CIM/CCM card dispenser.

CIM-5000 Serie Kartengeber mit Sicherheitskasetten
Reader + Encoder Magnetic Cards 3 tracks R+W, HiCo + LoCo
Chip Cards T=0 T=1 R+W
RF-cards ISO14443 Mifare
Card quantity 2 x 300 cards, 2 x 500 cards
Card thickness 0,2 mm – 1,0 mm / 0,008“ - 0,039“
Card issuing time 1,3 sec. (for Model without Printer)
Card transport roller
Voltage AC 110 ~ AC 220V Free voltage
Interface RS232 oder RS 422
Options Cabinet, bezel / mouthpiece, Thermal RW-Printer
Specifics card capture function


TOP



CIM-6000 Series
Card Issuing System

Type of Magazine 2 cartridge type


CIM-6000 Serie
Reader + Encoder Magnetic Cards 3 tracks R+W, HiCo + LoCo
Chip Cards T=0 T=1 R+W
RF-cards ISO14443 Mifare
Card quantity 2 x 200 cards, 2 x 500 cards
Card thickness 0,2 mm – 1,0 mm / 0,008“ - 0,039“
Card issuing time 1,3 sec. (for version without printer)
roller
Voltage AC 110 ~ AC 220V Free voltage
Interface RS232 oder RS 422
Options Cabinet, bezel / mouthpiece, shutter, Thermal RW-Printer , side doors for easy cartridge change.
Specifics card capture function


TOP

 

 

 

CIM-7000 Series
Card Issuing System

Type of Magazine 4 cartridge types
Reader + Encoder Magnetic Cards 3 tracks R+W, HiCo + LoCo
Chip Cards T=0 T=1 R+W
RF-cards ISO14443 Mifare
Card quantity 4 x 300 cards, 4 x 500 cards
Card thickness 0,2 – 1,0 mm
Card issuing time 1,3 sec. (for version without printer)
Card transport roller
Voltage AC 110 ~ AC 220V Free voltage
Interface RS232 oder RS 422
Options bezel / mouthpiece, shutter HiCo + LoCo Kodierung, Thermal RW Printer,
Specifics card capture function


TOP

 

 

 

CIM-8000 Series
Card Issuing System and Card Collector

Type of Magazine cartridge type
Reader + Encoder Magnetic Cards 3 tracks R+W, HiCo + LoCo
Chip cards T=0 T=1 R+W
RF-cards ISO14443 Mifare
Card quantity 500, 1000, 1500 cards
Card thickness 0,2 – 1,0 mm
Card issuing time < 1,2 sec.
Card transport roller, Elevator System
Voltage AC 110 ~ AC 220V Free voltage
Interface RS232, RS422
Options bezel / mouthpiece, shutter HiCo + LoCo Kodierung, Thermal RW Printer + others
Specifics card capture function


TOP

 

 

 

CIP-8000 Series
Card Dispenser + Card Collector + TRW Printer

Type of Magazine Type of Magazine
Reader + Encoder Magnetic Cards 3 tracks R+W, HiCo + LoCo
Chip Cards T=0 T=1 R+W
RF-cards ISO14443 Mifare
Printer
Thermal RW Printer
Card quantity 500, 1000, 1500 cards
Card thickness 0,2 – 1,0 mm
Card issuing time Depending on configuration and number of printed lines.
Card transport roller, Elevator System
Voltage AC 110 ~ AC 220V Free voltage
Interface RS232, RS422
Options bezel / mouthpiece, shutter HiCo + LoCo Kodierung + others.
Specifics card capture function


TOP

 

 

 

CIM-9900 Series
Card Dispenser + Card Collector - GEA-compatible

Type of Magazine GAE compatible cartridge
Reader + Encoder Magnetic Cards 2 tracks R+W, HiCo + LoCo
Chip Cards T=0 T=1 R+W
RF-cards ISO14443 Mifare
Reader + Encoder
ISO 14443A, Mifare
Card quantity 850 cards 0,76mm, 3100 cards 0,2mm (GEA)
Card thickness 0,2 – 1,0mm
Card issuing time 1 second for card issuing or collection
Card transport roller, Elevator System
Voltage DC +24V(±5%) (AC 110 ~ AC 220V Free voltageoptional)
Interface RS232
Options bezel / mouthpiece, error card bin


TOP

 

 

 

TIM-1000
Ticket Issuing Machine with Thermal Printer

Type of Magazine Single cards or Leparello / Fanfold TIM-1000 Ticket - Ausgabesystem mit Thermodrucker
Reader + Encoder ISO- Magnetic Cards 3 tracks R+W, HiCo + LoCo
Center Stripe Magnetic Cards
Chip Cards T=0 T=1 R+W
Card thickness 0,2 mm – 1,0 mm / 0,008“ - 0,039“
Voltage DC +24V
Interface RS232 und USB
Options Dual charge for refilling cards during operation, bezel / mouthpiece, shutter


TOP

 

 

 

TIM-2000
Ticket Issuing Machine with Thermal Printer

Type of Magazine Leparello / Fanfold TIM-2000 Ticket - Ausgabesystem mit Thermodrucker
Reader + Encoder ISO- Magnetic Cards 3 tracks R+W, HiCo + LoCo
Card thickness 0,06 – 0,2 mm
Voltage DC +24V
Interface RS232
Options bezel / mouthpiece, shutter


TOP

 

 

 

CIS-1000
Card Issuing System

Type of Magazine stacker magazins
 CIS-1000 System zur Kartenverarbeitung Kartengeber + Sammler
Reader + Encoder Magnetic Cards 3 tracks R+W, HiCo + LoCo
Chip Cards T=0 T=1 R+W
RF-cards ISO14443 Mifare
Card quantity each 200, 300, 500 cards in Card Dispenser and Card Collector
Card thickness 0,2 – 1,0 mm
Card issuing time 2,5 – 5,0 seconds depending on the configuration
Voltage AC 110 ~ AC 220V Free voltage
Interface RS232 oder RS422


TOP

 

 

 

CIS-2000
Card Issuing System

Type of Magazine cartridge type CIS-2000 System zur Kartenverarbeitung Kartengeber + Sammler
Reader + Encoder Magnetic Cards 3 tracks R+W, HiCo + LoCo
Chip Cards T=0 T=1 R+W
RF-cards ISO14443 Mifare
Card quantity Je 200, 300, 500 cards in Card Dispenser and Card Collector
Card thickness 0,2 mm – 1,0 mm / 0,008“ - 0,039“
Card issuing time 2,5 – 5,0 seconds depending on the configuration
Voltage AC 110 ~ AC 220V Free voltage
Interface RS232 oder RS422


TOP



CIS-2000C


Type of Magazine cartridge type CIS-2000C System zur Kartenverarbeitung Kartengeber + Sammler
Reader + Encoder Magnetic Cards 3 tracks R+W, HiCo + LoCo
Chip Cards T=0 T=1 R+W
RF-cards ISO14443 Mifare
Card quantity Je 200, 300, 500 cards in Card Dispenser and Card Collector
Card thickness
0,2 mm – 1,0 mm / 0,008“ - 0,039“
Card Issuing time
 2,5 – 5,0 seconds, (depending on configuration)
Voltage AC 110 ~ AC 220V Free voltage
Interface RS232 oder RS422


TOP



CIS-4000
Card Issuing System

Type of Magazine cartridge type CIS-4000 System zur Kartenverarbeitung Kartengeber + Sammler
Reader + Encoder Magnetic Cards 3 tracks R+W, HiCo + LoCo
Chip Cards T=0 T=1 R+W
RF-cards ISO14443 Mifare
Card quantity 2x 200, 2x 300, 2x 500 cards in Card Dispenser and Card Collector
Card thickness 0,2 mm – 1,0 mm / 0,008“ - 0,039“
Card issuing time 2,5 – 5,0 Sek depending on the configuration
Voltage AC 110 ~ AC 220V Free voltage
Interface RS232 oder RS422


TOP

 

 

CIS-4000C
Card Issuing System – Cabinet Version

Type of Magazine cartridge type CIS-4000C System zur Kartenverarbeitung Kartengeber + Sammler
Reader + Encoder Magnetic Cards 3 tracks R+W, HiCo + LoCo
Chip Cards T=0 T=1 R+W
RF-cards ISO14443 Mifare
Card quantity 2x 200, 2x 300, 2x 500 cards in Card Dispenser and Card Collector
Card thickness 0,2 mm – 1,0 mm / 0,008“ - 0,039“
Card issuing time 2,5 – 5,0 Sek depending on the configuration
Voltage AC 110 ~ AC 220V Free voltage
Interface RS232 oder RS422


TOP





CIM-8000 Serie
Kartengeber + Kartensammler